Certec flat inflatable fenders with cover

Certec

Référence: F-01

Made of strong PVC. Every fender can be installed “vertically” or “horizontally” (3 fixing points at the top and one at the bottom). Every fender is delivered with removable cover. Guarantee: 1 year for all manufacturer defaults. With CERTEC fenders, space storage problems are solved and your boat will be equipped with the right number of the fender. The flat fenders are available in 2 thicknesses: 20 cm and 30 cm.
FENDERS MARKING: It customizes your fender and deters theft + 12.00 euro to each fender. Please, contact our assistants.

€ 343

Hors TVA ?

Information

Le montant de la TVA dépend du pays de destination de la commande. Si nécessaire, la TVA sera ajoutée à la commande lors de la commande.

Livraison
à bord de votre yacht

Consultations
des experts

Vous n'avez pas trouvé ce qui vous est nécessaire ?
Faites une commande

PLUS DE DETAILS

Certec inflatable fenders are working on the low-pressure and high volume principle. This means that your fender should never be too much inflated.

Certec Inflatable fenders fabrication:

PVC 1100 deniers Same material as inflatable boats.
They are assembled by high-frequency welding technology.
The fender material offers a high UV resistance. Every fender is submitting to a 24 hours test before delivery.

The sizes available are (widht x height):
- 50 x 80 cm
- 50 x 100 cm
- 50 x 120 cm
- 60 x 60 cm
- 60 x 80 cm
- 60 x 100 cm
- 60 x 120 cm
- 80 x 150 cm

Inflatable fenders are exposed to temperature variations.
A fender can get very hard under full sun and des-inflate when low-temperature.
It is good to adapt the internal pressure of each fender in front of temperature variation.
This point means that our fenders are well adapted for the boat with permanent people on board.
In case of loose of airtightness of your fender, please proceed to the following stapes:
1. Remove the cover of the bladder.
2. Location of the hole (cover your fender of soap-water and see where the bubbles are), then des-inflate your fender.
3. Application of the repair kit (see option)
4. Inflate your fender and test it 24 hours.

INFORMATIONS DE COMMANDE:

Veuillez prévoir 3 à 5 jours ouvrables pour préparer la commande à expédier. En raison de la situation actuelle, certains envois et livraisons peuvent être retardés de quelques jours. Nous apprécions votre patience et votre compréhension.