Cruise 3.0 TS

Torqeedo

Ref: 1265-00

Electric outboard for motorboats and sailboats up to 3 tons. Maximum efficiency outboard with tiller control. Improved robustness and improved corrosion protection 3,000 W input power, in terms of propulsion is comparable with a 6-hp petrol outboard. Integrated on-board computer with GPS-based range calculation

€ 3 041

Excl. VAT ?

PAY ATTENTION, PLEASE

VAT amount depends on the country of order destination. If necessary VAT will be added to the order in the checkout at the time of placing the order.

Delivery
to your yacht

Ask
our experts

Didn't find the right one?
Make your own odrer

Ref

Shaft

Price

1265-00

Long

€ 3 041

1264-00

Short

€ 3 041

EAN: 4260113696750
Equipment included: Outboard with tiller control, cable set (S: 4.4m L: 4.3m, 35 mm²) including main switch and propeller B 12 x 10,5 WDR, emergency magnetic stop key
Warranty: 2 years for non-commercial use

The new Cruise 3.0 T is a 6 horsepower-equivalent drive system for sailboats up to 30 feet or displacement hulls up to 3 tons.This lightweight electric drive system runs on 24-volts (not included) and is best paired with one or more Power 24-3500 lithium-ion batteries.

Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users.

All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon with advanced helical gear design.

Also available in remote-steered and fixed pod models.

Cruise 3.0 T - Benefits:

High-efficiency outboard with 3,000 W input power, equivalent to a 6 HP petrol outboard
Pair with Power 24-3500 for best performance and accurate range/runtime functionality
Cruise 3.0 recommended for dinghies and sailboats up to 3 tons
T model is equipped with tiller control with integrated display screen and magnetic kill switch (included in scope of delivery)
Rugged pylon with integral fin – extra protection when running aground
Highest-grade seawater-proof aluminum, hard-anodized for long service life, even in the harshest conditions
Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with differentelectrochemical properties. Ships with anode set for fresh and saltwater
Also compatible with third-party batteries (24-volt) but careful matching to motor power requirements is needed

Technical Data Cruise

	Cruise 3.0 T
Input power in watts	3000
Propulsive power in watts	1530
Comparable petrol outboards (propulsive power)	6 HP
Comparable petrol outboards (thrust)	8 HP
Maximum overall efficiency in %	51
Static thrust in lbs*	142
Integrated battery	-
Nominal voltage	24
Final charging voltage	-
Total weight in kg	19.7 (S) / 20.2 (L)
Motor weight without battery in kg	-
Weight of integrated battery	-
Shaft length in cm	62.5 (S) / 75.5 (L)
Standard propeller v = speed in km/h at p = power in watts	Propeller B 12 x 10,5 WDR
Alternative propeller options

Propeller Guide
Maximum propeller speed in rpm	1100
Control	Tiller
TorqLink	No
Steering	360° lockable
Tilting device	Manual with grounding protection
Tilt angle	61,3°
Trim device	Manual, 4-step
Integrated on-board computer	Yes
Stepless forward/reverse drive	Yes

* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.

ORDERING INFORMATION:

Please allow 3-5 business days for preparing the order to ship. Due to the current situation, some shipments and deliveries may be delayed for a few days. We appreciate your patience and understanding.