EMPFEHLENSWERTE WAREN

Cruise 6.0 T

Torqeedo

Art: 1267-00

Electric outboard for motorboats and sailboats up to 6 tons. Maximum efficiency outboard with tiller control Improved robustness and improved corrosion protection 6,000 W input power, in terms of propulsion is comparable with an 9.9-hp petrol outboard Integrated on-board computer with GPS-based range calculation

€ 3 670

Ohne MwSt ?

ACHTEN SIE

Der Mehrwertsteuerbetrag hängt vom Bestimmungsland der Bestellung ab. Bei Bedarf wird die Mehrwertsteuer zum Zeitpunkt der Bestellung in der Kasse hinzugefügt.

Anlieferung
auf Ihre Yacht

Konsultationen
von Experten

Das Nötige nichts gefunden haben?
Machen Sie Bestellung

Art

Shaft

Preis

1267-00

Long

€ 3 670

1266-00

Short

€ 3 670

AUSFÜHRLICHER

Item number: 1266-00/1267-00 | EAN: 4260113696781

Equipment included: Outboard with tiller steering, integrated on-board computer with GPS-based range calculation, cable set (S: 4.4m L: 4.3m, 35 mm²) including main switch and propeller B 12.5 x 17 HSP, emergency magnetic stop key
Warranty: 2 years for non-commercial use

Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users.

All Cruise systems have a built-in GPS with on-board computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon with advanced helical gear design.

Cruise 6.0 T is a tiller-equipped 48-Volt, 9.9 horsepower-equivalent outboard perfect for boats up to 6 tons.

The Cruise 6.0 is also available as a remote-steered or fixed pod model.

Cruise 6.0 T - Benefits:

High-efficiency outboard with 6,000 W input power, equivalent to a 9.9 HP petrol outboard
Pair with Power 48-5000 for best performance and accurate range/runtime functionality
T model is equipped with tiller control with integrated display screen and magnetic kill switch (included in scope of delivery)
Rugged pylon with integral fin – extra protection when running aground
Highest-grade seawater-proof aluminum for long service life, even in the harshest conditions
Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater
Also compatible with third-party batteries (48-Volt) but careful matching to motor power requirements is needed and additional cable set part number 1990-00 is required

The on-board computer display provides information on the most important performance data.

Technical Data Cruise

Input power in watts	6000
Propulsive power in watts	3504
Comparable petrol outboards (propulsive power)	9.9 HP
Comparable petrol outboards (thrust)	15 HP
Maximum overall efficiency in %	58
Static thrust in lbs*	230
Integrated battery	-
Nominal voltage	48
Final charging voltage	-
Total weight in kg	21.3 (S) / 21.8 (L)
Motor weight without battery in kg	-
Weight of integrated battery	-
Shaft length in cm	62.5 (S) / 75.5 (L)
Standard propeller v = speed in km/h at p = power in watts	Propeller B 12,5 x 17 HSP
Alternative propeller options	Propeller B 12 x 13 THR
Propeller Guide
Maximum propeller speed in rpm	1130
Control	Tiller
Steering	360° lockable
Tilting device	Manual with grounding protection
Tilt angle	61,3°
Trim device	Manual, 4-step
Integrated on-board computer	Yes
Stepless forward/reverse drive	Yes

SHAFT LENGTH
The main thing to note here is the size of the transom on your boat. If your transom height is higher, you will have to pick a higher shaft length for your outboard motor. This is important to consider because if you get a longer shaft than the transom of the boat, you will face some serious issues with stabilization when you drive.

You can easily figure out what is the correct shaft length by measuring the height of the back of your boat. Take a measuring tape and measure the height of the back of the boat in the middle. The result you get is how long your shaft length should be to get an optimal drive. Although it is not a huge deal if the length of your shaft is longer by an inch, it is best if you can get an exact match.

BESTELLINFORMATIONEN:

Bitte erlauben Sie 3-5 Werktage, um die Bestellung für den Versand vorzubereiten. Aufgrund der aktuellen Situation können sich einige Sendungen und Lieferungen um einige Tage verzögern. Wir schätzen Ihre Geduld und Ihr Verständnis.