0
€ 0 Place your order

Propstrip: Remover for Propspeed coating

Oceanmax
Ref: PRST1000

Propstrip is a safe, low toxicity remover that reduces labour costs for removing Propspeed by up to 70%. Propspeed System Component.

€ 100
Excl. VAT ?
PAY ATTENTION, PLEASE
VAT amount depends on the country of order destination. If necessary VAT will be added to the order in the checkout at the time of placing the order.
More

Instructions: 

  • Make sure the area you are working with is totally dry. Propstrip DOES NOT like any moisture. Water de-activates the Propstrip completely. Ensure any areas that are not being treated are adequately protected from Propstrip. If the propeller still has a silicone layer, you may need to abrade the surface with 80 grit sandpaper. This will allow the Propstrip to work more effectively, penetrating the silicone faster. 
  • Apply Propstrip liberally with a brush ensuring there is a thick coating on 100% of the surface being treated allowing for complete saturation of the part.
  • In cold conditions, 10-15°C or 50-60°F, it could take up to 3 hours to release the old Propspeed or if colder, it may take longer than 3 hours.
  • In hot conditions above 35°C or 95°F it may be necessary to ensure the treated area is in shade to prevent the application from drying out while performing its action.
  • Propstrip works faster in hot conditions, so within 1-3 hours you should begin to visually observe the discolouration of the old Propspeed. When the product has started to bubble and change colour, it is doing its job. Test a small area with a scraper to see if it will freely release from the substrate.
  • Once ready, wash with a hose or a bucket of water and a Scotch-Brite pad.  Any remaining product is removed using a wet Scotch-Brite pad or wet/dry sandpaper. Look after your environment: we strongly recommend the use of hessian (burlap) or a ground cover to capture the removed product.
  • Once the old Propspeed has been removed, sand the surface to an 80-grit profile. If the boat has not had Propspeed applied before, simply abrade the surface to an 80-grit profile. This can be done using a mechanical sander. For difficult areas hand sand using wet or dry 80-grit sandpaper.
More information

ORDERING INFORMATION:

Please allow 3-5 business days for preparing the order to ship. Due to the current situation, some shipments and deliveries may be delayed for a few days. We appreciate your patience and understanding.

Propstrip: Remover for Propspeed coating
Propstrip: Remover for Propspeed coating

DIRECT DELIVERY
TO YOUR YACHT

More about delivery

FROM THE LEADERS
OF YACHTS INDUSTRY

More about brands

EXPERT
SELECTION

More about our approach

QUALITY
ASSURANCE

More about assurance
Added to your cart
Continue shopping
Go to your cart
Added to favourites
Removed from favorites
SUBSCRIBE OUR NEWSLETTER
Subscribe to our newsletters and we will introduce you to our special offers, new products and yachting news. You can unsubscribe any time if you decide that you are not interested in it.
SUBSCRIBE OUR NEWSLETTER
more
One-click order

By confirming the order, I declare that I have read and agree to the terms of the public offer and the privacy policy.