Mooring Spring MPP/T-007 New special

Sidermarine

Articolo: MPP/T-007

Mooring Spring for boat 7-9 m. Boat weight up to 1800 kg. Spring wire diameter 7 mm. Shock absorber force 260 Kg. Breaking load of 3000 Kg. Patented stainless steel mooring spring, high performance, low noise inserts, replaceable friction. The materials used and the technical solutions adopted in the design phase and production appears to be very efficient. The MOLLAFLEX inserts increased the load cushioning. Components Mollaflex: N.2. Minimum order 2 pc.

€ 84

€ 108

IVA esclusa ?

Si prega di notare

L'importo dell'IVA dipende dal paese di consegna dell'ordine. L'IVA verrà aggiunta all'ordine nel carrello una volta completati tutti i dettagli dell'indirizzo di spedizione.

Consegna
sul suo yacht

Consultazioni
di esperti

Non ha trovato il giusto?
Faccia l'ordine

DETTAGLI

The patented MOORING SPRING, produced in a special alloy of stainless steel, is extremely resistant and produces no noise, thanks to the antifriction and antisqueaking inserts.
The spring presents replaceable components and is highly resistant to marine corrosion and perfectly adaptable to different loads of stress.
Thanks to the wide range of sizes it achieves high performances for all types of vessels.
The overall cushioning, at 60-70%, is given by the compression of the spring, made of a special alloy in stainless steel, with extremely high elasticity. Under high-stress conditions, the Mollaflex- elastomer component intervenes as support.
If the steel spring breaks within the end of its technical cycle, the Mollaflex – Elastomer continues to perform its damping function, preventing accidents and damages that the boat may suffer if not properly moored, in storm conditions.
It is very important to note, therefore, that this Mollaflex-elastomer component not only increases the load of cushioning, along with the mechanical work of the spring but may even replace the spring.

TECHNICAL DESCRIPTION OF MOORING SPRINGS
Article	MPP/T-005	MPP/T-007	MPP/T-008	MPP/T-009	MPP/T-010	MPP/T-012	MPP/T-015
Boat length	Max 7 m.	7-9 m.	8-11 m.	9-12 m.	10-16 m.	16-25 m.	25-35m.
Spring diameter	5 mm	7 mm	8 mm	9 mm	10 mm	12 mm	15 mm
Diameter	65	74	74	74	90	100	107
Damping force	105 kg	200 kg	250 kg	350 kg	470 kg	750 kg	1450 kg
Elastomer	//	2	4	4	4	4	8
Damping force increased elastomer	105 kg	260 kg	325 kg	455 kg	611 kg	975 kg	2 030 kg
Breaking load	2 000 kg	3 000 kg	4 000 kg	6 000 kg	10 000 kg	20 000 kg	35 000 kg
Boat weight	1 200 kg	1 800 kg	2 400 kg	3 600 kg	6 000 kg	12 000 kg	21 000 kg
The loads of the cushioning (Damping force) are increased in the models with inserts Mollaflex-Elastomer It is recommended to use the model of the upper range when it is at the limit of the band For the correct assessment of the purchase of the mooring spring suitable for your boat, you must report the weight of the boat to value of the breaking load less than 30-40% Sidermarine exonerates from any responsibility or replacement under warranty in case of purchase of a spring non suitable for the weight of the boat and therefore undersize.

INFORMATIONS DE COMMANDE:

Veuillez prévoir 3 à 5 jours ouvrables pour préparer la commande à expédier. En raison de la situation actuelle, certains envois et livraisons peuvent être retardés de quelques jours. Nous apprécions votre patience et votre compréhension.

È possibile modificare il numero di elementi nel Smart Set da soli! Utilizzare + / - per aggiungere numero necessario o rimuovere il prodotto dal set.

Area Personale

Set Attracco / Lunghezza della barca fino a 8 m