TO YOUR YACHT
Dilute NO SEL before use at a rate of 1 litre per 5 litres of water.
For in-board engines:
1 / Close the water inlet valve to the through-hull.
2 / Disconnect the water intake pipe, put it in the bucket and run the engine, being careful not to run it dry.
For outboard motors:
At the end of rinsing with freshwater, run the engine in a basin with NO SEL diluted at a rate of 1 litre to 5 litres of water.
In both cases, two minutes of rinsing is sufficient.
Important: Always follow the procedures indicated by the engine manufacturer before starting the flushing.
NO SEL is used as a spray at a rate of 100 ml per 400 ml of water on all surfaces: boat, trailer, fittings ...
NO SEL is also used in soaking at a rate of 1 litre per 5 litres of water. The break time is 5 min to several hours depending on the thickness of the deposits for outboard motors, inboard, jet ski, diving equipment
Please allow 3-5 business days for preparing the order to ship. Due to the current situation, some shipments and deliveries may be delayed for a few days. We appreciate your patience and understanding.